Skip to main content
Industrial filtration vessels

Filtration Systems

Engineered Water Solutions for Demanding Applications.

Multi-media, cartridge, bag, and specialty filtration to remove solids, protect membranes, and keep clarifier and tower water on specification.

Filtration Roles

Filtration may guard RO membranes, polish tower water, or protect heat exchangers depending on particle size and load.

Commercial equipment room with filtration vessels, softener tanks and piping manifolds

Backwashable Media

Sand and multimedia filters for higher solids loading and longer run times between service.

  • Automatic backwash
  • Flow matched
  • Valving layout
UV treatment unit and large cartridge filter housing plumbed into a commercial water line

Cartridge / Bag

Polishing stages with predictable change-outs for tight downstream requirements.

  • Absolute rating options
  • Quick service
  • Redundant housings
Commercial equipment room with filtration vessels, softener tanks and piping manifolds

Specialty Media

Activated carbon, organics guard, or iron removal when chemistry calls for it.

  • Chlorine control
  • Color/taste
  • Targeted metals

Compare Approaches

A side-by-side look at typical approaches for facility water systems.

Media

Solids loading
Higher
Operator labor
Backwash cycles
Downstream protection
RO / tower

Cartridge / Bag

Solids loading
Polish
Operator labor
Change-outs
Downstream protection
Critical loop

Specialty

Solids loading
Targeted
Operator labor
Media refresh
Downstream protection
Chemical feed

Key Takeaways

  • Particle counts and turbidity data justify filter micron rating—guessing leads to premature plugging.
  • Prefer gradual footprint—prefilters are cheaper than destroyed membranes.
  • Bypass and isolation valving simplify service.

Let's Solve Your Water Challenges.

A customized water treatment plan for your facility, operation, and goals.

Schedule an Industrial Consultation

Common Questions

Can filters tie into a side-stream on a tower?

Yes—side-stream skids are a common way to reduce solids without full flow interruption.